小型展覽室空調解決方案

 海洛斯精密空調    |      2016-04-06
針對小型展覽室的空調解決方案,小型展覽室的特點為藝術品場所,小型展覽室無大量發熱設備,小型展覽室内會限制參觀人員的人數。根據小型展覽室的特點,空調選型推薦如下:HIMOD Q14機型。
This is a solution of A/C for a small exhibition room. The characteristic of the small exhibition room is the demonstration place for art, and there is a small amount of equipment. It will limit the number of visitors. According to the characteristics of the space for the small exhibition room, the selection of model is recommended as HIMOD Q14.
經濟效益評估:(Economic Evaluation)
  • 該小型展覽室需安裝空調面積總計100平方米左右,有少量發熱設備,對溫濕控制及節能有較高的要求,依據實際情況每平米所需制冷量平均按400W計算,總需求40KW制冷量。
The total area is of about 100 square meters for the small exhibition room, and there is a small amount of heat source, and it highly requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 400W, the total demand for cooling capacity is of 40KW.
  • 要滿足該項目40KW的制冷量,需使用HIMOD Q14機組1套裝機。
To meet the cooling capacity of 40KW, this project is needed to use one set of unit (HIMOD Q14).
  • 經濟效益對比估算:傳統空調滿足40KW制冷量的輸入功率至少為13.5KW左右,而HIMOD Q14機組1套主機的輸入功率合計為8.37KW,主機部分省電38%,全年共計節省電費0.98萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (40KW cooling capacity) is at least about 13.5KW, and the HIMOD Q14 input power per set is of 8.37KW. The energy saving is up to 38%. The annual saving is more than 9800 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)
精密空調 機房精密空調