辦公室空調解決方案

 海洛斯精密空調    |      2016-04-06
針對辦公室的空調解決方案,辦公室的特點為工作場所,辦公室有發熱設備,辦公室内有人員。根據辦公室的特點及熱源,空調選型推薦如下:HIMOD S20機型。
This is a solution of A/C for an office. The characteristic of the office is the workplace, and there is a large amount of equipment. There are working personnel inside the office. According to the characteristics of the space for the office and heat source, the selection of model is recommended as HIMOD S20.
經濟效益評估:(Economic Evaluation)
  • 該辦公室需安裝空調面積總計300平方米左右,有發熱源,對溫濕控制及節能和噪音降低有要求,依據實際情況每平米所需制冷量平均按350W計算,總需求的105KW制冷量。
The total area is of about 300 square meters for the wood plant, and there is a large amount of heat source, and it requires the temperature and humidity control and energy saving and noise reduction features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 105KW.
  • 要滿足該項目105KW的制冷量,需使用HIMOD S20機組6套裝機。
To meet the cooling capacity of 105KW, this project is needed to use six sets of unit (HIMOD S20).
  • 經濟效益對比估算:傳統空調滿足105KW制冷量的輸入功率至少為40KW左右,而HIMOD S20機組6套主機的輸入功率合計為24KW,主機部分省電40%,全年共計節省電費3萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (105KW cooling capacity) is at least about 40KW, and the HIMOD S20 input power per set is of 4KW. The energy saving is up to 40%. The annual saving is more than 30000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)
精密空調 機房精密空調