會所酒窖空調解決方案(B)

 酒窖空調    |      2016-04-06
針對會所酒窖場所的空調解決方案,由于會所無明顯發熱設備,且對溫濕度控制、空間、節能有較高要求。根據會所酒窖場所的特點,空調選型推薦為:W13機型。
The solution of wine cellar for a club is equipped with higher requirements for temperature and humidity control, space, and energy saving because of the no heating in the room. According to the characteristics of the space for the club, the selection of model is recommended as W13.
經濟效益評估:(Economic Evaluation)
  • 該會所酒窖需安裝空調面積總計30平方米左右,會所酒窖無發熱設備,且對溫濕度控制、空間、節能有較高要求。依據實際情況每平米所需制冷量平均按350W計算,總需求為10.5KW的制冷量。
The total area is of about 30 square meters for the club, and there is no heating source, and it requires the temperature and humidity control, space, and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 10.5KW.
  • 要滿足該項目10.5KW的制冷量,需使用W13機組1套裝機。
To meet the cooling capacity of 10.5KW, this project is needed to use one set of unit (W13).
  • 經濟效益對比估算:傳統空調滿足10.5KW制冷量的輸入功率至少為4KW左右,而W13機組1套主機的輸入功率合計為2.5KW,主機部分省電40%,全年共計節省電費0.3萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)

Comparison of economic benefit estimation: the traditional air-conditioning input power (10.5KW cooling capacity) is at least about 4KW, and the W13 input power per set is of 2.5KW. The energy saving is up to 40%. The annual saving is more than 3000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)


精密空調 機房精密空調