别墅酒窖空調解決方案

 酒窖空調    |      2016-04-06
針對别墅酒窖場所的空調解決方案,由于會所無明顯發熱設備,且對溫濕度控制及節能有較高要求。根據别墅酒窖場所的特點,空調選型推薦為:S42機型。
The solution of wine cellar for a villa is equipped with higher requirements for temperature and humidity control and energy saving because of the no heating in the room. According to the characteristics of the space for the villa, the selection of model is recommended as S42.
經濟效益評估:(Economic Evaluation)
  • 該别墅酒窖需安裝空調面積總計100平方米左右,别墅酒窖無發熱設備,且對溫濕度控制及節能有較高要求。依據實際情況每平米所需制冷量平均按350W計算,總需求為35KW的制冷量。
The total area is of about 100 square meters for the villa, and there is no heating source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 35KW.
  • 要滿足該項目35KW的制冷量,需使用S42機組1套裝機。
To meet the cooling capacity of 35KW, this project is needed to use one set of unit (S42).
  • 經濟效益對比估算:傳統空調滿足35KW制冷量的輸入功率至少為12KW左右,而S42機組1套主機的輸入功率合計為7.4KW,主機部分省電38.3%,全年共計節省電費0.9萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (35KW cooling capacity) is at least about 12KW, and the S42 input power per set is of 7.4KW. The energy saving is up to 38.3%. The annual saving is more than 9000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)
推薦精密空調 機房精密空調