私人酒窖空調解決方案

 酒窖空調    |      2016-04-06
針對私人酒窖場所的空調解決方案,由于會所無明顯發熱設備,且對溫濕度控制及節能有較高要求。根據私人酒窖場所的特點,空調選型推薦為:S21機型。
The solution for private wine cellar is equipped with higher requirements for temperature and humidity control and energy saving because of the no heating in the room. According to the characteristics of the space for the private wine cellar, the selection of model is recommended as S21.
經濟效益評估:(Economic Evaluation)
  • 該私人酒窖需安裝空調面積總計120平方米左右,私人酒窖無發熱設備,且對溫濕度控制及節能有較高要求。依據實際情況每平米所需制冷量平均按350W計算,總需求為42KW的制冷量。
The total area is of about 120 square meters for the private wine cellar, and there is no heating source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 42KW.
  • 要滿足該項目42KW的制冷量,需使用S21機組2套裝機。
To meet the cooling capacity of 42KW, this project is needed to use two sets of unit (S21).
  • 經濟效益對比估算:傳統空調滿足42KW制冷量的輸入功率至少為16KW左右,而S21機組2套主機的輸入功率合計為9.6KW,主機部分省電40%,全年共計節省電費1.3萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (42KW cooling capacity) is at least about 16KW, and the S21 input power per set is of 4.8KW. The energy saving is up to 40%. The annual saving is more than 13000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)
推薦精密空調 機房精密空調