印刷廠空調解決方案

 工廠車間空調    |      2016-04-06
針對印刷廠的空調解決方案,印刷廠的特點為生産工作場所,印刷廠有少量發熱設備,印刷廠内生産人員不會太多。根據印刷廠的特點,空調選型推薦如下:HIMOD E18機型。
This is a solution of A/C for a printing plant. The characteristic of the printing plant is the production of workplace, and there is a small amount of equipment. Production personnel are not too much. According to the characteristics of the space for the printing plant, the selection of model is recommended as HIMOD E18.
經濟效益評估:(Economic Evaluation)
  • 該印刷廠需安裝空調面積總計600平方米左右,有少量發熱設備,對溫濕控制及節能有要求,依據實際情況每平米所需制冷量平均按400W計算,總需求的240KW制冷量。
The total area is of about 600 square meters for the printing plant, and there is a small amount of heat source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 400W, the total demand for cooling capacity is of 240KW.
  • 要滿足該項目240KW的制冷量,需使用HIMOD E18機組4套裝機。
To meet the cooling capacity of 240KW, this project is needed to use four sets of unit (HIMOD E18).
  • 經濟效益對比估算:傳統空調滿足240KW制冷量的輸入功率至少為90KW左右,而HIMOD E18機組4套主機的輸入功率合計為58.5KW,主機部分省電35%,全年共計節省電費6萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (240KW cooling capacity) is at least about 90KW, and the HIMOD E18 input power per set is of 14.625KW. The energy saving is up to 35%. The annual saving is more than 60400 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)