木材加工廠空調解決方案

 工廠車間空調    |      2016-04-06
針對木材加工廠的空調解決方案,木材加工廠的特點為生産工作場所,木材加工廠有少量發熱設備,木材加工廠内生産人員不會太多。根據木材加工廠的特點,空調選型推薦如下:S29機型。
This is a solution of A/C for a wood plant. The characteristic of the wood plant is the production of workplace, and there is a small amount of equipment. Production personnel are not too much. According to the characteristics of the space for the wood plant, the selection of model is recommended as S29.
經濟效益評估:(Economic Evaluation)
  • 該木材加工廠需安裝空調面積總計400平方米左右,有少量發熱設備,對溫濕控制及節能有要求,依據實際情況每平米所需制冷量平均按350W計算,總需求的140KW制冷量。
The total area is of about 400 square meters for the wood plant, and there is a small amount of heat source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 140KW.
  • 要滿足該項目140KW的制冷量,需使用S29機組5套裝機。
To meet the cooling capacity of 140KW, this project is needed to use five sets of unit (S29).
  • 經濟效益對比估算:傳統空調滿足140KW制冷量的輸入功率至少為55KW左右,而S29機組5套主機的輸入功率合計為32KW,主機部分省電42%,全年共計節省電費4.4萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (140KW cooling capacity) is at least about 55KW, and the S29 input power per set is of 6.4KW. The energy saving is up to 42%. The annual saving is more than 44000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)